In last article, we saw how to perform a test DR or you can say that Test Drill using Site Recovery Manager.
In this article, we are going to explore a live situation if you face a real Disaster then how will you recover Virtual Machines from Protected Site to Recovery Site.
Step by Step: –
- Login to Site Recovery Manager Console.
- Go to Monitor tab under Recovery Plan Section.
- Click on Red icon.
- Here you will get a different options. In test recovery, you didn’t had this option. But if you perform a real DR, then you have two options.
- Planned Migration
- Disaster Recovery
- If you want to perform a real recovery during any Disaster, you have to choose option 2 which is for Disaster Recovery scenario.
- Accept Recovery Confirmation and Click on Next.
- Disaster Recovery is ready to start. Click on Finish.
- Real Recovery has been started. You can monitor the status of recovery here .
So that’s all from VMware Site Recovery Manager module. We are closing this module here. If you have not gone through with earlier articles, please go through with that to get a detailed information on VMware SRM. I will come back with the new topic next week. Stay tuned to Cloud Pathshala.
Once again Thank you so much for being part of Cloud Pathshala and visiting here. Do share you inputs in comment box. If you want to add on here, send us email at admin@cloudpathshala.com. Follow us on our social media platform to stay updated and get notification for any new article. You can find us any platform at @CloudPathshala. You can subscribe our Youtube change at youtube.com/Cloudpathshala
If you found this module or article useful, please do share with your friends. I will say a good bye for now. Let’s meet again in next module on different topic.
Take a look in below topics, explore and learn Site Recovery Manager: –
-
Learn SRM – Part 1 – Introduction of VMware Site Recovery Manager 8.1
-
Learn SRM – Part 2 – Understand VMware Site Recovery Manager Licensing
-
Learn SRM – Part 3 – Understand Minimum Requirement for SRM in your Home Lab
-
Learn SRM – Part 4 – Prepare for Replicated Storage in you Home Lab (Ignore this step in Real Environment. You need to interact with Storage team for all these tasks in real environment)
-
Learn SRM – Part 4.1 – Deploy HP VSA in Both Site
-
Learn SRM – Part 4.2 -Configure HP VSA Appliance Networking in both Site
-
Learn SRM – Part 4.3 -Install HP CMC Management Console
-
Learn SRM – Part 4.4 -Add Appliance in HP CMC
-
Learn SRM – Part 4.5 -Create Management Group in HP VSA
-
Learn SRM – Part 4.6 -Create Cluster and Volumes in HP VSA
-
Learn SRM – Part 4.7 -Find and Add ISCSI Initiator in ESXi Host
-
Learn SRM – Part 4.8 -Assign Volume to ESXi Host
-
Learn SRM – Part 4.9 -Scheduling Array Based Replication
-
-
Learn SRM – Part 5 – Install VMware Site Recovery Manager 8.1 (SRM)
-
Learn SRM – Part 6 – Install SRA (Storage Replication Adapter)
-
Learn SRM – Part 7 – Configure Site Pairing for both Protected and Recovery Site
-
Learn SRM – Part 8 – Configure SRM Array Manager Pairing
-
Learn SRM – Part 9 – Configure Resource Mapping in VMware SRM
-
Learn SRM – Part 10 – Create Placeholder Datastore in VMware SRM
-
Learn SRM – Part 11 – Configure Protected Groups in VMware SRM
-
Learn SRM – Part 12 – Configure Recovery Plans in VMware SRM
-
Learn SRM – Part 13 – Perform Test Drill using VMware SRM
-
Learn SRM – Part 14 – Perform Cleanup Activity in VMware SRM
-
Learn SRM – Part 15 – Perform Real Recovery during Disaster Scenario in VMware SRM 6.5
About The Author
