In previous post, we explored how to deploy an HP VSA System. Now we are going to configure HP VSA appliance networking.
- Access vSphere Web Client and access appliance which we recently deployed in previous article.
- Go to Host and Click on Virtual Machines Section. You will see HP VSA appliance system as a Virtual machine over there. Now right click on that and click on Open remote console.
- Open Console for HP VSA Appliance. You will get below screen.
- Type Start
- Select Login and Press Enter.
- Select Network TCP/IP Settings.
- Select eth0.
- Provide hostname which want to put for HP VSA system.
- Provide IP Address configuration for HP VSA.
- Click on OK.
Perform the same steps for both appliances in Protected and Recovery Site.
Take a look in below topics, explore and learn Site Recovery Manager: –
-
Learn SRM – Part 1 – Introduction of VMware Site Recovery Manager 8.1
-
Learn SRM – Part 2 – Understand VMware Site Recovery Manager Licensing
-
Learn SRM – Part 3 – Understand Minimum Requirement for SRM in your Home Lab
-
Learn SRM – Part 4 – Prepare for Replicated Storage in you Home Lab (Ignore this step in Real Environment. You need to interact with Storage team for all these tasks in real environment)
-
Learn SRM – Part 4.1 – Deploy HP VSA in Both Site
-
Learn SRM – Part 4.2 -Configure HP VSA Appliance Networking in both Site
-
Learn SRM – Part 4.3 -Install HP CMC Management Console
-
Learn SRM – Part 4.4 -Add Appliance in HP CMC
-
Learn SRM – Part 4.5 -Create Management Group in HP VSA
-
Learn SRM – Part 4.6 -Create Cluster and Volumes in HP VSA
-
Learn SRM – Part 4.7 -Find and Add ISCSI Initiator in ESXi Host
-
Learn SRM – Part 4.8 -Assign Volume to ESXi Host
-
Learn SRM – Part 4.9 -Scheduling Array Based Replication
-
-
Learn SRM – Part 5 – Install VMware Site Recovery Manager 8.1 (SRM)
-
Learn SRM – Part 6 – Install SRA (Storage Replication Adapter)
-
Learn SRM – Part 7 – Configure Site Pairing for both Protected and Recovery Site
-
Learn SRM – Part 8 – Configure SRM Array Manager Pairing
-
Learn SRM – Part 9 – Configure Resource Mapping in VMware SRM
-
Learn SRM – Part 10 – Create Placeholder Datastore in VMware SRM
-
Learn SRM – Part 11 – Configure Protected Groups in VMware SRM
-
Learn SRM – Part 12 – Configure Recovery Plans in VMware SRM
-
Learn SRM – Part 13 – Perform Test Drill using VMware SRM
-
Learn SRM – Part 14 – Perform Cleanup Activity in VMware SRM
-
Learn SRM – Part 15 – Perform Cleanup Activity in VMware SRM
About The Author
